Product Overview (Front) POWER LED – a solid light indicates a proper connection to the power supply. STATUS LEDs – a solid light on the port indicates a connection to an Ethernet network. Product Overview (Back) CONSOLE Port –For resetting to factory defaults, or reconfiguring the device.
If the Local Network LED illuminates, it means you have a proper connection. Insert an Ethernet cable into the WAN port on the back panel of the DSA-3100. Connect the other end to a router or directly to a high speed cable or DSL modem.
Using The Setup Wizard Open your Web browser and type “https://192.168.0.40” the URL address box. Then press the Enter or Return key. Type “admin” for both the username and the password. Click Enter Once you have logged in, the Home screen will appear.
The Setup Wizard (continued) You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next Set System Information in the fields provided to you. The Succeed Page is the URL that you are directed to when you have been successfully Authenticated.
The Setup Wizard (continued) At this point, the setup wizard will ask you for your Internet connection type. If you have a Dynamic or PPPoE connec- tion, you will be brought to the corresponding page. Select an Option Click Next Set Interface Configuration - Authentication.
The Setup Wizard (continued) Select the User Manager wish to use based on the Authentication type are you are using. In this Quick Installation Guide we will be using “Local” user database. The DSA-3100 also supports POP3, RADIUS LDAP for authentication. Click Next...
You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.