Get Command - D-Link DFL-M510 User Manual

(B) help set
>> help set
set - Set system parameters. Available commands
system - System configurations, including IP, password and etc.
time - Device clock setting
state - Device operation state
remote - Setup remote access configuration.
Interface - Change interface link mode
(C) help history
>> help history
history - Show all command history
(D) help exit
>> help exit
exit - Log out
(E) help reboot
>> help reboot
reboot - Reboot system
(F) help reset
>> help reset
reset - Reset system configurations to manufacturing defaults
(G) help set
>> help ping
ping - Ping utility

Get Command

This command will display all kinds of configuration information of the DFL-M510.
Main Sub
command command
get system
time
state
interface
E
XAMPLE
(A) get system
>> get system
Example Command description
get system Display system configurations, including IP, password
and etc.
get time Display device clock setting
get state Display device operation state
get interface Display device interface configuration
Information Security Gateway
Appendix A: The Command Line Interface -- 107