Table of Contents
Advertisement
Server Access
Secure Client
IP Address
Add/Delete
Configuring Server Access for LAN and WAN for Specific IP Addresses
1. Select All in the Server Access field.
Note: This setting has no remote access restrictions; any IP address will have access to the
DFL-M510.
2. Click the Selected IP Address radio button and click Add .
3. Type in the IP Address and Subnet Mask for the PC that will access the DFL-M510 and click
OK . The IP Address is added to the Selected IP Address window. Repeat steps 2 and 3 to add
other IP Addresses.
Options are:
Disable - No access from LAN or WAN
All - Access from LAN and WAN
(Note: This setting has no remote access
restrictions; any IP address will have
access to the DFL-M510.)
WAN - Access fron WAN only
LAN - Access from LAN only
The default option is Disable.
Options are All or Selected IP Address,
that the SNMP commands are restricted to
come from.
Use Add/Delete to select IP addresses.
Information Security Gateway
Chapter 2: System -- 27
Advertisement
Table of Contents
