Table of Contents
Advertisement
4.6.1 Setup Wizard
The administrator can configure the DSA-3600 via its web management interface as specified. In order to connect to
the Internet, the TCP/IP related information such as IP address, subnet mask, and gateway address, must first be
obtained from the ISP. The Configuration Wizard uses four simple steps to provide easy setup of the DSA-3600.
General
WAN1 Interface
Local User Account (Optional)
Confirm and Restart
The Setup Wizard is to provide express setup procedures for DSA-3600. Follow the instructions given at each
step to change the system admin password, select time zone, configure WAN1 interface, and create local user
account. Upon completing the Setup Wizard procedures, the system has to be restarted to have the setting take
effort. The system is ready for operation after restart. Please refer to the Quick Install Guide of DSA-3600 if
step-by-step screen images could help the process.
Running the Wizard
Click Tools and Setup Wizard the left-top menu, and the Setup Wizard page will appear.
Please read the recommendation of each step.
Chapter 4.6 Tools
131
Advertisement
Table of Contents
