DFL-M510
VID3
VID4
Management
Refer to the following to configure the VLAN setting.
1. Click System > Network and then select the VLAN tab.
VLAN Enabled
VID1 - VID7
Management
Group
2. Click the VLAN Enabled checkbox to enable VLAN.
3. Type in each VID in the VID1 to VID7 boxes.
NOTE
38 -- Chapter 2: System
5
7
VID2
Enables or disables the VLAN function
Type in the VLAN ID.
Select the Management VLAN Group
The DFL-M510 supports up to seven VLANs.
The Management VID must be either PVID, or VID1 to
VID7. Configurations depend on your environment.