Snmp Host Table - D-Link xStack DGS-3200-10 User Manual

xStack

SNMP Host Table

Users can set up SNMP trap recipients for IPv4.
To view the following window, click Configuration > SNMP Settings > SNMP Host Table:
To add a new entry to the Switch's SNMP Ho st Table, enter the information at the top of the window and then click the Apply
button. To delete an existing SNMP Host Table entry, click the Delete button corresponding to the entry to delete.
The following parameters can set:
Parameter
Host IP Address
SNMP Version
Community String /
SNMP V3 User Name
To implement your new settings, click Apply.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 - 45. SNMP Host Table window
Description
Type the IP address of the remote management station that will serve as the SNMP host for
the Switch.
V1 – To specify that SNMP version 1 will be used.
V2c – To specify that SNMP version 2c will be used.
V3-NoAuthNoPriv – To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv
security level.
V3-AuthNoPriv – To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-AuthPriv – To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Type in the community string or SNMP V3 user name as appropriate.
45