D-Link xStack DGS-3200-10 User Manual page 104

xStack
Member Port (e.g.: 1-4, 6)
Tagged Member Port
VID (2-4094)
Replace Source IP
Source Port (e.g.: 1-4, 6)
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be
the untagged members of the multicast VLAN.
Enter a port or list of ports that will become tagged members of the Multicast VLAN.
Add the corresponding VLAN ID of the Multicast VLAN. Users may enter a value
between 2 and 4094.
This field is used to replace the source IP address of incoming packets sent by the
host before being forwarded to the source port.
Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be
the tagged members of the multicast VLAN.
91