xStack
SNTP Settings
SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer.
The SNTP Settings folder contains two windows: Time Settings and TimeZone Settings.
Time Settings
Users can configure the time settings for the Switch.
To view the following window, click Configuration > SNTP Settings > Time Settings:
The following parameters can be set or are displayed:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second Server
SNTP Poll Interval In
Seconds (30-99999)
Date (DD/MM/YYYY)
Time (HH:MM:SS)
Click Apply to implement your changes.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 2 - 35. Time Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
Set Current Time
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Status
SNTP Settings
35