D-Link DXS-3250 Web/Installation Manual page 159

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide
•
Priority — Priority value of the port. The priority value influences the port choice when a bridge has two ports
connected in a loop. The priority value is between 0 -240. The priority value is determined in increments of 16.
•
Designated Bridge ID — Indicates the bridge priority and the MAC Address of the designated bridge.
•
Designated Port ID — Indicates the selected port D-Link priority and interface.
•
Designated Cost — Indicates the cost of the port participating in the STP topology. Ports with a lower cost
are less likely to be blocked if STP detects loops.
•
Forward Transitions — Indicates the number of times the port has changed from Forwarding state to Block-
ing state.
•
LAG — Indicates the LAG to which the port belongs.
2. Click . The STP Interface Settings Page opens:
Figure 99: STP Interface Settings Page
3. Select Enable in the STP field.
4. Define the Fast Port, Enable Root Guard, Path Cost, Default Path Cost, and Priority fields.
5. Click . STP is enabled on the interface, and the device is updated.
Page 157