Resetting Etherlike Statistics Counters - D-Link DXS-3250 Web/Installation Manual

–
60 Sec—Indicates that the Etherlike statistics are refreshed every 60 seconds.
–
No Refresh—Indicates that the Etherlike statistics are not refreshed.
•
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received on the selected
interface.
•
Single Collision Frames — Displays the number of single collision frames received on the selected
interface.
•
Late Collisions — Displays the number of late collision frames received on the selected interface.
•
Excessive Collisions — Displays the number of excessive collisions received on the selected interface.
•
Internal MAC Transmit Errors — Displays the number of internal MAC transmit errors on the selected
interface.
•
Oversize Packets — Displays the number of oversized packet errors on the selected interface.
•
Internal MAC Receive Errors — Number of internal MAC received errors on the selected interface.
•
Received Pause Frames — Displays the number of received paused frames on the selected interface.
•
Transmitted Paused Frames — Displays the number of paused frames transmitted from the selected
interface.
2. Select an interface in the Interface field. The Etherlike statistics are displayed.

Resetting Etherlike Statistics Counters

1. Open the Etherlike Statistics Page.
2. Click . The Etherlike statistics counters are cleared.
Page 252
Viewing Statistics
Viewing Interface Statistics