The DXS-3227 device has the LED indications on a LED panel on the left side of the device.
The following figure illustrates the port LEDs.
Figure 6:
DXS-3227 1000Base-T Gigabit Ethernet RJ-45 Port LEDs
The RJ-45 ports on both devices have two LEDs, one for speed, and one for Link /activity. The LED indications are
described in the following table:
Table 2:
1000Base-T Gigabit Ethernet RJ-45 Port LED Indications
Por t Des criptio n
Speed
Link/Activity LED
SFP LEDs
The following figure illustrates the port LEDs.
Figure 7:
SFP LEDs
L ED In dica tio n
D escr ip tio n
Green
A 1000-Mbps link is established on the port.
Amber
A 100-Mbps link is established on the port.
Off
A 10-Mbps link is established on the port.
Green
A link is established on the port.
Flashing Green
There is data transmission on the port.
Off
No link is established on the port.
Page 16
Device Description
LED Defiitions