D-Link DXS-3250 Web/Installation Manual page 199

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide
The Policy Page contains the following fields:
•
— Displays the user-defined policy name.
Policy Name
•
Remove — Removes policies. The possible field values are:
–
Checked — Removes the selected policy.
–
Unchecked — Maintains policies.
2. Click . The Add Policy Page opens:
Figure 125:Add Policy Page
In addition to the fields in the Policy Profile Page, the Add Policy Page contains the following fields:
•
— Selects a class map for the class.
Class Map
•
— Policer type for the class. Possible values are:
Police
–
Aggregate — Configures the class to use a configured aggregate policer selected from the drop-down
menu. An aggregate policer is defined if the policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes. An aggregate policer can be applied to multiple
classes in the same policy map, but cannot be used across different policy maps.
–
Single — Configures the class to use manually configured information rates and exceed actions.
•
— User-defined aggregate policers.
Aggregate Policer
•
Ingress Committed Information Rate (CIR)
value is
Police Single
•
Ingress Committed Burst Size (CBS)
value is Single .
•
Exceed Action — Action assigned to incoming packets exceeding the CIR. This field is only relevant when
the Police value is Single
–
Drop — Drops packets exceeding the defined CIR value.
— CIR in bits per second. This field is only relevant when the
.
— CBS in bytes per second. This field is only relevant when the
. Possible values are:
Page 197
Police