Startup Menu Functions - D-Link DXS-3250 Web/Installation Manual

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide
7. Enter the command "reload". The following message is displayed:
Console# reload
This command will reset the whole system and disconnect your current
session.Do you want to continue (y/n)[n]?
8. Enter "Y" to reboot the switch.
Boot Image Download
Loading a new boot image from the TFTP server and programming it into the flash updates the boot image. The
boot image is loaded when the switch is powered on.
To download a boot file through the TFTP server:
1. Ensure that an IP address is configured on one of the device ports and pings can be sent to a TFTP server.
2. Ensure that the file to be downloaded (the .rfb file) is saved on the TFTP server.
3. Enter the command "show version" to verify which boot version is currently running on the device. The follow-
ing is an example of the information that appears:
Console# show version
SW version x.xx.xx (date xx-xxx-2004 time 13:42:41)Boot version
x.xx.xx (date xx-xx-2004 time 15:12:20)HW version xx.xx.xx (date xx-
xxx-2004 time 12:12:20)
4. Enter the command "copy tftp://{tftp address}/{file name} boot" to copy the boot image to the switch. The fol-
lowing is an example of the information that appears:
Console# copy tftp://176.215.31.3/6024_boot-10013.rfb
Erasing file
...done.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!Copy:393232 bytes copied in 00:00:05 [hh:mm:ss]
5. Enter the command "reload". The following message is displayed:
Console# reload
This command will reset the whole system and disconnect your current
session. Do you want to continue (y/n)[n]?
6. Enter "Y" to reboot the switch.

Startup Menu Functions

Additional configuration functions can be performed from the Startup menu.
To display the Startup menu:
1. During the boot process, after the first part of the POST is completed press
onds after the following message is displayed:
Autoboot in 2 seconds -press RETURN or Esc.to abort and enter prom.
<Esc>
Page 41
or within two sec-
<Enter>