•
Frame Type — Specifies the packet type accepted on the port. The possible field values are:
–
Admit Tag Only — Only tagged packets are accepted on the port.
–
Admit All — Both tagged and untagged packets are accepted on the port.
•
Ingress Filtering— Indicates whether ingress filtering is enabled on the port. The possible field values are:
–
Enable — Enables ingress filtering on the device. Ingress filtering discards packets that are defined to
VLANs of which the specific port is not a member.
–
Disable — Disables ingress filtering on the device.
•
Reserve VLAN — Indicates the VLAN selected by the user to be the reserved VLAN if not in use by the sys-
tem.
2.
Select a port.
3.
Click
. The VLAN Interface Settings Page opens:
Figure 73: VLAN Interface Settings Page
4.
Define the Interface, Port VLAN Mode, Dynamic, PVID, Frame Type, Ingress Filtering, and Reserve VLAN for
Internal Use fields.
5.
Click
. The VLAN interface settings are modified, and the device is updated.
Page 126
Configuring VLANs
Defining VLAN Interface Settings