D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide
Stacking Ports
The device provides two stacking HyperG.Link interface ports. One stacking port provides an Up connection, while
the second provides a Down stacking connection. A 4X to 4X Infidband Cable is used to connect devices in the
stacking configuration.
RS-232 Console Port
The RS-232 port is an asynchronous serial console port supporting the RS-232 electrical specification. The port is
used to connect the device to a console managing the device. This interface configuration is as follows:
•
Eight data bits.
•
One stop bit.
•
No parity.
•
Baud rate is 9600 (default). The user can change the rate from 115200 down to 9600 bps.
•
Console speeds of 57600 and 115200.
Page 13