JCROffroad RG4CCMP Install Instructions

4th gen ranger center console molle panel

Download this manual

4 TH GE N RAN G ER

C E NT E R CONSO L E

MO LLE PANE L

IN STALL INSTRU C TI ONS

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

Thank you for purchasing from JcrOffroad! Checkout our website, www.jcroffroad.com for other great off-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don't hesitate to call us at 269-353-1184!

Need help?

Do you have a question about the RG4CCMP and is the answer not in the manual?

Page 1 Be sure to check out the install video on the product page, if available. Thank you for purchasing from JcrOffroad! Checkout our website, www.jcroffroad.com for other great off-road products. Be sure to rate and review our product online. If you have any questions or are missing parts, please...
Page 2 I NCLU D E D HARDWARE .257” ID X .500 “ OD X.375” Nylon Spacer 8-15 X 3/4” PAN PHIL Button Head .257” ID X .500 “ OD X.625” Nylon Spacer 8-15 X 1” PAN PHIL Button Head...
Page 3 I NCLU D E D PARTS...
Page 4 ASSE M BLY Move your seat all the way back. Place the bottom edge of the panel on the edge of the seam running horizontally across the side of the center console. Then, find where that seam runs into another under the dash and makes sort of a T shaped junction.