Priority Watch Operation - Icom IC -2410A Instruction Manual

PRIORITY WATCH OPERATION 8
(2) Priority watch operation
Refer to the following table regarding priority watch Push [BAND] or push and hold [BAND] to operate on
operation. However, before operating priority watch, the other band while operating priority watch.
push [V SQL] or [U SQL] several times until noise is
muted.
PRIORITY RESUME
WATCH TYPE PRE-OPERATION START CONDITION STOP
VFO Set the memory
t channel to be
Memory channel watched.
Push [M/CALL] to
return to VFO mode.
e Push [SET] to return to
5 types of resume E ae j
E ale e Push [PGRICS] to
available.
E Set the call channel Ae diis onini i
Call channel to be watched. Ape: : teas Set the desired activate the optional
ium condition using SET | pager function.
mode in advance. e Push [MW]to return to
(p. 26) VFO mode and
activate the optional
voice synthesizer
VFO function.
t Start the memory
Memory scan scan. (p. 25)