Icom IC -2410A Instruction Manual page 25

ll Transferring memory data
The function is especially useful when searching for
signals around the memory channel frequencies.
1) Select the desired memory channel as described
on p. 21.
2) Push and hold [MW] for 2 sec.
e The contents are transferred to the VFO.
e The transceiver goes into VFO mode automatically.
"L——T8
e 0000000 O
Push and hold [MW].
MEMORY CHANNEL OPERATION 5
CONVENIENT
Offset frequency, subaudible tone frequency, subaudible
tone encoder ON/OFF setting and offset direction (DUP
or DUP-) are simultaneously transferred into the VFO.
You need not select a required repeater condition again.
If a memory or call channel contains an optional tone
squelch setting, the setting is also transferred into the
VFO. .
Memory
channel
contents
VFO