Icom IC -2410A Instruction Manual page 18

4 BASIC OPERATION
B SUB band access
This function enables you to set the SUB band
contents while transmitting or receiving on the MAIN
band.
It is easy to access the SUB band and return to the
MAIN band with the [BAND] switch.
Neither the optional pager nor code squelch func-
tion can be activated while accessing the SUB band.
(p. 33)
1)
3)
Push and hold [BAND] to access the SUB band.
e "SUB" appears.
eThe MAIN band still functions for receiving and
transmitting.
Set a SUB band operating frequency or memory
channel using the tuning control or [UP] and [DN]
on the microphone.
e Set a function, if desired.
e The MAIN band output power cannot be changed while
accessing the SUB band.
To exit the SUB band, push and hold [BAND]
until "SUB" disappears.
e To switch from the SUB band to the MAIN band, push
[BAND].
usne SET MODE
eSUB BAND MUTE/
SUB BAND BUSY BEEP
The SUB band mute function automatically cuts out SUB
band AF signals when both MAIN and SUB band signals
are received.
The SUB band busy beep sounds when the SUB band
squelch is closed to inform you that the SUB band
squelch has been opened. |
1) Push [SET] several times until "Sub" appears on the
function display.
e Refer to p. 11 for SET mode details.
2) Rotate the tuning control to set the condition.
[sce | om | 9 —
[ m | ww
[ow | 9
Sub. Aut
Sub. Aut (te1)
3) Push any switch except [SET] and [HI/LOW] to set the
condition and to exit SET mode.
V/U same setting