Icom IC -2410A Instruction Manual page 46

13 OPTIONAL DTMF REMOTE
DTMF encoder are necessary.
(1) Pre-operation
(2) Operation
1) Push and hold [PGR/CS] until "REMOTE" appears
to select standby for the remote control.
2) From the controller transceiver, transmit a DTMF
code to activate External DTMF Remote as follows.
(D When a password has been set, push [B], the
3-digit password and [3t].
@ When a password has not been set, push [B]
and [i1]. |
e "REMOTE" and "SUB" blink.
3) Transmit the following DTMF code to control from
the controller transceiver. See p. 42 for details.
m| tow E
a| m "
:
Input a
numeral
after
pushing [D].
De] we - i
4) To cancel the function, push [B] and [*].
e These will be transmitted as a DTMF code.
e "REMOTE?" stops blinking and "SUB" disappears. The
transceiver returns to standby for the remote control.