Download Print this page

Safety Information; Installation Instructions; Personal Protective Equipment (Ppe) - Icon Process Controls Truflo PPB Series Quick Start Manual

Battery operated pressure gauge

Advertisement

Truflo
— PPB Series
®
Battery Operated Digital Pressure Gauge

Safety Information

De-pressurize and vent system prior to installation or removal
Confirm chemical compatibility before use
DO NOT exceed maximum temperature or pressure specifications
ALWAYS wear safety goggles or face-shield during installation and service
DO NOT alter product construction
Warning | Caution | Danger
Indicates a potential hazard. Failure to follow all warnings
may lead to equipment damage, injury, or death.
Note | Technical Notes
Highlights additional information or detailed procedure.
WARNING
Please ensure that the Instruments are not to be subject to water hammer or pressure spikes! Always
Pressure Test System with H2O Prior to Initial Start-Up
Before installation be certain the appropriate instrument has been selected considering operating pressure, full scale pressure,
wetted material requirements, media compatibility, operating temperature, vibration, pulsation, desired accuracy and any other
instrument component related to the service application including the potential need for protective attachments and/or special
installation requirements. Failure to do so could result in equipment damage, failure and/or personal injury. Ensure only qualified
personnel are permitted to install and maintain this instrument.
Please Ensure Full Pipe
PPB Series can be installed in a horizontal or vertical direction.
24-0388 © Icon Process Controls Ltd.

Installation Instructions

Do not tighten by grasping the case of the
gauge as this may cause damage. Always
pressure test connections for leaks with
water prior to use on chemical service. The
user shall ensure that the correct transmit-
ter pressure range and the correct materi-
als of construction are selected.

Personal Protective Equipment (PPE)

Always utilize the most appropriate PPE during
installation and service of Truflo products.
Pressurized System Warning
Gauge may be under pressure. Take caution to vent system
prior to installation or removal. Failure to do so may result
in equipment damage and serious injury.
2

Advertisement

loading
Need help?

Need help?

Do you have a question about the Truflo PPB Series and is the answer not in the manual?