Table of Contents
Advertisement
UltraFlo
®
2000 SERIES
Ultrasonic Flow Meter
Safety Information
Please always observe the following safety instructions!
Please pay attention to the safety instructions with the following pictograms and signal words in these operating instructions :
Warning | Caution | Danger
indicates general hazardous situations or cases
which, if not avoided, could result in serious injury or
death.
Notice : Is used to lead users to helpful information not related to personal injury.
Intended Use
®
The flow meter UltraFlo
®
The UltraFlo
is not intended for use in medical applications.
The volume flow meter UltraFlo
"Safety specifications for electrical measurement, control and laboratory devices").
The manufacturer is not liable for any injury, damage or harm due to inappropriate or unintended use or modifications of the flow
meter. Conversions and/or changes to the flow meter may only be made, if they are expressly performed in accordance with the
operating instructions in this operating manual.
Personnel for Installation, Commissioning and Operation
Assembly, electrical installation, commissioning and maintenance of the flow meter must be carried out by qualified,
trained personnel. The qualified personnel must have read and understood the operating instructions in this
operating manual and must follow the operating instructions in this manual.
The installer has to ensure that the flow meter is correctly connected according to the electrical connection diagrams
in this operating manual.
Serious injury or death from electric shock may occur if wiring, installation, disassembly or removal of wires is
performed while electrical power is energized
Technological Progress
The manufacturer reserves the right to revise, alter, or modify the flow meter to the most current technology without special prior notice.
Further information about the latest updates and potential additions to these operating instructions are available from
www.iconprocon.com
Product Description
®
The UltraFlo
2000 Flow Meter utilizes ultrasonic technology to measure both conductive and non conductive liquids, and is an excellent
choice for very corrosive liquids such as strong acids and alkalies.
®
The UltraFlo
2000 has no moving parts and can measure pulsating, dosing and metering flow applications. All parts that contact the
liquid are made of corrosion resistant Polysulfone.
®
The UltraFlo
2000 is characterized by its high measurement accuracy, repeatability and guaranteed long-life performance.
should only be used for measuring the flow of pure, homogeneous liquids.
®
is built in accordance with industry standard EN 61010 regulations (corresponds to VDE 0411
IMPORTANT!
indicates situations or cases which, if not avoided,
could result in damage or failure of the UltraFlo
equipment.
www.iconprocon.com | sales@iconprocon.com | 905.469.9283
®
03
Advertisement
Table of Contents
Need help?
Do you have a question about the truflo UltraFlo 2000 Series and is the answer not in the manual?