Overview; Features - NSD Absocoder NCV-220HSSIM2R Specifications & Instruction Manual

1. OVERVIEW

NCV-220HSSI is the ABSOCODER converter which is compatible with SSI (Synchronized Serial Interface).
This converter can detect the machine position as the absolute value by combining the ABSOCODER sensor.
The host controller can read this position data in SSI signals.

1-1. Features

● High reliability
An absolute position detection format ensures accurate position detection even if a power interruption or
unexpected noise condition occurs. An origin returning operation is not required.
● Superior durability
NSD's original ABSOCODER is used as the position sensor which features a no-contact construction for excellent
durability. This sensor offers problem-free operation, even in environments where it is exposed to vibration, impact
shocks, extreme temperatures, oil, and dust.
● Compact design
The unit's outside dimensions (39(W) x 155(H) x 93(D)) were miniaturized. DIN rail can be used, so mounting is
much easier.
● Less wiring
The wiring can reduce by using the SSI communication.
● Two axes ABSOCODER sensor can connect
The machine positions for two axes can be detected by one converter. The space-saving in the control panel can
be conducted.
● Rotating direction setting function
The increase direction of the position data can be set by changing the setting switch.
● Output code switch function
The converter can switch codes (gray / binary) by changing the setting switch.
● Zero point setting function
The zero point can set in desired machine position by pressing the zero point setting button on the panel or turning
the zero point signal ON from external input. The converter has a setting button and input signal for two axes, so
the zero point setting is available for each axis.
● Error detection function
An error status can be checked by the monitor LED of the converter when an error occurs. The PLC and host
controller can also check the error, because the converter has a system ready signal.
● Applicable with JKPEV-S cable
A commercially available cable (JKPEV-S 1.25mm
● Compliance with CE standards
The converter complies with CE (EMC Directive) standards.
x 5P) can be used between the converter and ABSOCODER sensor.
2
1