Extending The Menu Display Time - Canon WUX5000 User's Manual & Installation Manual

Setting Various Functions
Extending the Menu Dis-
play Time
[Menu display time]
HDMI
Digital PC
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] > [Menu
display time]
Normal
The menu is displayed for 10 or 30 sec-
onds.
Extended The menu is displayed for 3 minutes.
Downloaded From projector-manual.com Canon Manuals
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [Normal] is the factory default.
Component
• The following display and operation are also
Analog PC
132
changed.
Item
The display time of the following
screens
-MENU screen
-Input (P60)
-Zoom adjustment (P71)
-Focus adjustment (P73)
-Keystone adjustment (P76)
-Keystone reset (P77)
-D.image shift adjustment (P67, P68)
-D.image shift reset (P69)
-Aspect (P70)
-Image mode (P78)
-Volume adjustment (P83)
-Lamp mode (P119) *1
-Lens shift (P74)
-Lens shift reset (P131)
Press-and-hold operation of
pointer buttons other than for
[Zoom adjustment], [Focus
adjustment], and [Lens shift]
Press-and-hold operation of
VOL button
Press-and-hold operation of the
D.ZOOM button
Key repeat *2
*1 WUX4000
*2 WX6000 / SX6000
[Normal] [Extended]
10 / 30
3 minutes
seconds
Enabled Disabled
[On] [Off]