Paper Is Crooked; Paper Not Aligned With Right Guide; Cannot Detect Papr - Canon imagePROGRAF iPF655 User Manual

Paper is crooked.

Paper loaded crooked was detected when the paper was advanced.
Note
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or
Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing prob-
lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.

Paper not aligned with right guide.

When paper was loaded, it was not aligned with the guide
on the right side.

Cannot detect papr

Cause
The paper has come out of the printer.
iPF655
Cause
Cause
Follow these step to reload a sheet.
Error Message
Corrective Action
Follow these steps to reload the roll.
1. Push the Release Lever back.
2. Adjust the right edge of the roll to make it par-
allel to the orange Paper Alignment Line.
3. Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
→P.626
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on
the right.
(See "Loading Sheets in the Printer.")
Corrective Action
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
Corrective Action
> Messages regarding paper >
→P.630
→P.652
Paper is crooked.
13
869