Canon imagePROGRAF iPF655 User Manual page 739

Inter- TCP/ IPv4
face IP
Setup
IPv6
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
iPF655
Setting Item
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Set-
tings
Subnet Mask
Default G/W
DNS DNS Dync up-
Set- date
tings
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS State-
Set- Dync full
tings update Addr
State-
less
Addr
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
Printer Parts
Description, Instructions
Specify the protocol used to configure the IP address
automatically.
Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
> Control Panel >
9
723
Menu Settings