Canon imagePROGRAF iPF655 User Manual page 390

Windows Software
2.
Move the slider for each item to the left or right to adjust the settings.
Raster and Shaded/Rendered
Viewports
OLE
Trade-off
3.
Click the OK button.
Merge Control Settings
4
Use thse settings to merge intersecting lines.
1.
Click the Merge Control below Graphics.
The Device and Document Settings sheet opens and switches to the Merge Control settings.
374
Lines Overwrite
Graphics Settings
> HDI Driver >
Setting
Use these settings to adjust the balance between print quality, memory consump-
tion, and the print speed. If set to None, you cannot print raster images. Printing
time will take longer the higher you set the Best setting.
Use these settings to adjust the balance between print quality, memory consump-
tion and the print speed when printing a OLE object. If set to None, you cannot
print OLE objects. Printing time will take longer the higher you set the Best set-
ting.
Use these settings to lower the print quality by a certain degree if the print job can-
not be completed at the best quality.
Setting
Where the lines intersect, the line that is printed last is visible, but the lines below it
are not visible.
Details
Details
iPF655