Other Messages; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number) - Canon imagePROGRAF iPF655 User Manual

Error Message >

Other Messages

GARO Wxxxx (x represents a number) ........................................................................................................... 884

ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 884

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................... 884

Top cover is open. ........................................................................................................................................... 885
Prepare for parts replacement. ........................................................................................................................ 885
Parts replacement time has passed. ............................................................................................................... 885
Unknown file. ................................................................................................................................................... 885
Multi-sensor error ............................................................................................................................................ 886
Error in cutter position. .................................................................................................................................... 886
GARO Wxxxx (x represents a number)
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
13
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job.
884
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
An error requiring service may have occurred.
GARO Wxxxx (x represents a number)
Other Messages >
Cause
Cause
Cause
Corrective Action
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Turn off the printer and remove the roll from the printer
before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact your
Canon dealer for assistance.
Corrective Action
Corrective Action
iPF655