Opening From The Autocad File Menu - Canon imagePROGRAF iPF655 User Manual

Opening from the AutoCAD File Menu

Follow the procedure below to open the Plotter Configuration Editor dialog box from the AutoCAD File menu.
1.
Select Plot from the AutoCAD File menu. The Plot dialog box opens.
Check the Name setting under Printer/plotter and confirm that iPFxxxx.pc3 (the name of the printer you use) is
displayed.
Click the Properties button.
Note
• If any other printer name is selected, select the name of the printer that you want to use from the
Name list.
• The names of the printers installed when the HDI driver was installed are in the Name list.
iPF655
Windows Software > HDI Driver
Opening from the AutoCAD File Menu
>
4
367