Paper Jam; Paper Is Crooked - Canon iPF685 User Manual

Hide thumbs Also See for iPF685:
Table of Contents

Advertisement

iPF685
Cause
A print job for printing on sheets
was sent when a roll is loaded.

Paper jam

Paper jam

Cause
A paper jam oc-
For roll paper, cut the paper on the upper side of the {Paper Feed Slot.
curred in the
1.
Push the Release Lever back and remove the jammed paper.
printer during
printing.
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK but-
ton.
Printing will resume, starting from the page on which the error occurred.

Paper is crooked.

Paper is crooked.

Paper loaded crooked was detected when the paper was advanced.
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in
the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper
Important
may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document
when it is printed.
User's Guide
Downloaded from ManualsPrinter.com Manuals
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Cause
Corrective Action
Corrective Action
P.629
P.632
P.375
P.394
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the orange
Paper Alignment Line.
3.
Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, remove the Roll Holder
from the printer, push the roll firmly in until it touches the Roll
Holder flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Corrective Action
P.375
P.372
P.394
Paper jam
665

Advertisement

Table of Contents
loading

Table of Contents