Messages Regarding Hp-Gl/2; This Type Of Paper Is Not Compatible With Hp-Gl/2; Gl2: W0502 The Parameter Is Out Of Range; Gl2: W0504 This Command Is Not Supported - Canon imagePROGRAF iPF655 User Manual

Messages regarding HP-GL/2

This type of paper is not compatible with HP-GL/2. ........................................................................................ 883

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ...................................................................... 883

GL2: W0502 The parameter is out of range. ................................................................................................... 883

GL2: W0504 This command is not supported. ................................................................................................ 883

This type of paper is not compatible with HP-GL/2.
Cause
The printer has received a HP-GL/2
print job that cannot be printed on the
paper that has been advanced.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause
The printer memory is
full.
GL2: W0502 The parameter is out of range.
A parameter specified in a HP-GL/2 command is out of the
supported range.
GL2: W0504 This command is not supported.
The printer has received an unsupported HP-GL/2 com-
mand.
iPF655
Follow these steps to replace the type of paper in the printer.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper with a type compatible with HP-GL/2. For details on pa-
per compatible with HP-GL/2, refer to the Paper Reference Guide. (See
"Types of Paper.")
Press ▲ or ▼ to select Print, and then press the OK button to resume print-
ing. However, note that this error may cause paper jams and affect the print-
ing quality.
Because the entire print job could not be received, the printer may not be able to print the
entire original. Check the printing results.
In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check
the printing results because the image may be incomplete in some cases.
Cause
Cause
Error Message >
Corrective Action
→P.620
Corrective Action
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning
> On in the Control Panel menu, set it to Off in-
stead.
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning > On
in the Control Panel menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2.
Messages regarding HP-GL/2 >
13
883