Canon imagePROGRAF iPF655 User Manual page 547

Note
• Available only if rolls are selected in Paper Source.
Paper Size
You can select the size of the print media.
Note
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Print Centered
Select this feature to print the image in the center of a cut sheet or to print left and right margins evenly from the edges of
roll paper.
Note
• This feature is useful when you print the document enlarged or reduced with Scaling as well. When an image
is scaled, it is always enlarged or reduced in reference to a starting point in the upper left corner of the page.
If the image is reduced, the bottom and right margins are enlarged and the top and left margins remain un-
changed. At that point, you can set all margins evenly with this feature.
No Spaces at Top or Bottom
You can set the printer to print without any empty area when the print data contains empty area at the top or bottom. Since
the printer does not feed paper over the empty area, you can save paper.
Note
• Available only if rolls are selected in Paper Source.
Rotate Page
Select the method for rotating page.
The following settings are available for rotating page.
Setting
Rotate Right 90 Degrees
Rotate Left 90 Degrees
Rotate 180 degrees
Note
• Available only if rolls are selected in Paper Source.
iPF655
Mac OS X Software
Rotates the portrait page right 90 degrees and print in landscape orientation. When
the rotated page can fit in the width of roll paper, the page is rotated automatically,
and when it can not fit in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then
the image is enlarged or reduced after rotating to fit the width of the roll paper.
Rotates the portrait page left 90 degrees and print in landscape orientation. When
the rotated page can fit in the width of roll paper, the page is rotated automatically,
and when it can not fit in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then
the image is enlarged or reduced after rotating to fit the width of the roll paper.
Allows you to rotate the image 180 degrees from the vertical to the right.
> Color imageRUNNER Enlargement Copy
Details
Output Settings Panel
>
5
531