Configuring The Ip Address On The Printer; Configuring The Ip Address Using The Printer Control Panel - Canon imagePROGRAF iPF655 User Manual

Network Setting
Note
• Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/

Configuring the IP Address on the Printer

You must configure the printer's IP address before using the printer in a TCP/IP network.
The printer's IP address is configured automatically when you install the printer driver following the instructions in the Set-
up Guide.
Configure the IP address by using imagePROGRAF Device Setup Utility, the printer Control Panel, or ARP or PING com-
mands, if the IP address is changed, or if you change the printer connection mode to a network connection. For details on
configuring the IP address, refer to the following topics.
• Configuring the IP Address Using imagePROGRAF Device Setup Utility

• Configuring the IP Address Using the Printer Control Panel

• Configuring the IP Address Using ARP and PING Commands
Important
• If you use a DHCP server for automatic assignment of the printer's IP address, printing may no longer be
possible after the printer is turned off and on. This is because an IP address different from before has been
assigned. Thus, when using DHCP server functions, consult your network administrator and configure the
settings in one of the following ways.
• Configure the setting for dynamic DNS updating
In RemoteUI, activate the setting Enable DNS Dynamic Update. (See "Configuring the Printer's TCP/
IP Network Settings.")
• Configure the setting for assignment of the same IP address each time the printer starts up
Note
10
• We recommend configuring the printer's IP address even if you will use the printer in networks other than
TCP/IP networks. Configuring the printer's IP address enables you to use RemoteUI to configure the network
settings and manage the printer with a web browser.
For details on RemoteUI, see "Using RemoteUI."
Configuring the IP Address Using the Printer Control Panel
This topic describes how to configure the printer's IP address on the Control Panel.
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
756
Configuring the IP Address on the Printer
> Network Setting >
IP or AppleTalk. In this case, complete the settings for each protocol you will use.
→P.760
Note
• If the Tab Selection screen is not displayed, press the Menu button.
(Windows)
→P.403
→P.756
→P.758
→P.759
).
iPF655