Tektronix Z-Active Series User Manual page 34

Figure 15: Handheld Adapter Assembly
Basic operations
3. Hold the lower housing and probe in place and fit the nose of the
upper housing into the nose of the lower housing.
4. Align the two housings.
5. Slide the upper housing latch forward to secure the housing in
place. See Figure 16.
b. Fit the wire around the post in the lower housing. To match
polarity, do not cross wires.
c. Secure the probe tip to the metal pin in the nose of the lower
housing.
Z-Active Differential Probe Family User Manual 21