Tektronix Z-Active Series User Manual page 33

(see Figure 14 on page 20). Tip-The Clip does not need to
distinguish mechanical mounting polarity, but the measurement
polarity of the probe can be adjusted using the variable spacing
Tip.-Affected by the polarity of the probe input connected to
the Clip.
Figure 14: Variable Spacing Tip- Clip assembly
Note : Variable spacing Tip-The Clip assembly is a small precision
part, so it must be handled with care if it is to be used for a long
period of time. When probing or handling, use the probe tip.-Be
careful about the force you apply to the Clip assembly.
Variable spacing Tip-To smooth the lever arm movement of the Clip
assembly, rotate the lever arm three to four times.
Variable Spacing Tip-For Clip assembly specifications, refer to the
Technical Reference on the Manual CD or the Tektronix home page.
Variable spacing Tip-Store the Clip assembly in the plastic accessory
box.
20 Z-Active Differential Probe Family User Manual
2. If necessary, separate the handheld adapter housing (see Figure 16
on page 22 for latch location) and install the probe in the lower
housing. See Figure 15.
a. Make sure the plastic pins on the lower housing engage the
slots on the probe (on either side). When properly secured,
the probe will not move within the lower housing.
Basic operations