Download Print this page

Safety Information - Lippert SolidStep 4.0 Oem Installation Manual

With lift assist
Hide thumbs Also See for SolidStep 4.0:

Advertisement

Introduction

Safety Information

Resources Required
Preparation
Installation
Adjust Transport Lock
Operation
Release Steps
Leg Extension Adjustment
Securing and Storing the Steps
Notes
Introduction
The SolidStep® 4.0 is a trailer entry step assembly with a lift assist system. It can be mounted to the side of
any trailer, providing ease of entry regardless of level ground. The suggested floor height range is between
35-44" for a 4-step tread and 27-36" for a 3-step tread.
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Safety Information
The step assembly was designed for an operational weight rating of 400 lbs.
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the Lippert limited warranty.
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters set forth in this
Unit MUST be supported per manufacturer's recommendations before working underneath. Failure
The "CAUTION" symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
Rev: 07.25.24
TABLE OF CONTENTS
to do so may result in death or serious personal injury.
in this manual.
manual.
Page 2
2
2
3
3
4
6
8
8
9
9
10
CCD-0008400

Advertisement

loading
Need help?

Need help?

Do you have a question about the SolidStep 4.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel