Download Print this page

Lippert Luverne 401535 Installation Manual

Advertisement

Quick Links

INSTALLATION MANUAL
This is the first of two manuals
required to complete this installation.
The second manual is included
with your running boards.
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Parts List
Qty Description
6
Mounting bracket
12
Flange nut, M8
Tools Required
Socket, M12
Torque bar
Torque Specifications
M8 bolt
7 ft-lbs.
Use above torque setting unless otherwise noted
LUVERNETRUCK.COM
Product Photo
NOTICE
Visit www.luvernetruck.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Maintenance
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Registration and Warranty
LUVERNE stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
PRODUCT SUPPORT: 877.287.8634
401535-INS-RA
04/21/2023
Front
ECN10680
PAGE 1
401535
Rear

Advertisement

loading
Need help?

Need help?

Do you have a question about the Luverne 401535 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lippert Luverne 401535

  • Page 1 INSTALLATION MANUAL 401535 This is the first of two manuals Product Photo required to complete this installation. The second manual is included with your running boards. Rear Level of Difficulty Easy Installation difficulty levels are based on time and effort involved and may vary depending on the installer level of expertise, condition of the vehicle and proper tools and equipment.
  • Page 2 ASSEMBLY Parts List Qty Description Mounting bracket Flange nut, M8 REAR FRONT Reverse side Step 1 Starting on the driver side of the vehicle, locate the factory studs on the inside of the rocker panel. Using the provided M8 flange nuts, secure the forward most mounting bracket to the studs. Do not fully tighten hardware at this time. Repeat for the middle and rear brackets.