General Safety Considerations - Danfoss iC7 Series Operating Manual

Operating Guide | iC7 Series Functional Safety
Designing appropriate safety-related control systems, such as hardware, software, and parameterization.
l

General Safety Considerations

2.3
When installing or operating the AC drive, pay attention to the safety information given in the instructions. For more information about
safety guidelines for installation, see the product-specific safety guide that is included in the drive shipment. For more information about
safety guidelines for operating the drive, see the product-specific guides.
COMMISSIONING TEST
After installing the safety functions, perform a commissioning test.
A successful commissioning test is required after the initial installation, and after each change to the installation or application
involving functional safety.
If the commissioning test fails, safe operation cannot be guaranteed.
RISK OF ELECTRIC SHOCK
The STO safety function does not provide electrical safety. The STO function itself is not sufficient to
implement the Emergency-Off function as defined by IEC 60204-1:2018. Using the STO function to implement
Emergency-Off may lead to death or personal injury.
Emergency-Off requires measures of electrical isolation, for example, by switching off mains via an extra
l
contactor.
10 | Danfoss Drives Oy © 2024.09
NOTICE
WARNING
AQ477043679710en-000102 / 172K2965A
Safety