Download  Print this page

Recording Outgoing Message (ogm) On An External Tad; Special Line Considerations - Brother MFC-440CN User Manual

Brother mfc-440cn: users guide.
Hide thumbs

Advertisement

Recording outgoing message
(OGM) on an external TAD
Timing is important in recording this
message. The message sets up the ways to
handle both manual and automatic fax
reception.
a
Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b
Limit your speaking to 20 seconds.
c
End your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
'After the beep, leave a message or
send a fax by pressing l 5 1 and Start.'
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must re-
record the OGM to include it.
Telephone Services and External devices

Special line considerations

7
Roll over phone lines
A roll over phone system is a group of two or
more separate telephone lines that pass
incoming calls to each other if they are busy.
The calls are usually passed down or 'rolled
over' to the next available phone line in a
preset order.
Your machine can work in a roll over system
as long as it is the last number in the
sequence, so the call cannot roll away. Do not
put the machine on any of the other numbers;
when the other lines are busy and a second
fax call is received, the fax call will be sent to
a line that does not have a fax machine. Your
machine will work best on a dedicated
line.
Two-line phone system
A two-line phone system is nothing more than
two separate phone numbers on the same
wall outlet. The two phone numbers can be
on separate jacks (RJ11) or mixed into one
jack (RJ14). Your machine must be plugged
into an RJ11 jack. RJ11 and RJ14 jacks may
be equal in size and appearance and both
may contain four wires (black, red, green,
yellow). To test the type of jack, plug in a two-
line phone and see if it can access both lines.
If it can, you must separate the line for your
machine. (See page 50.)
7
7
7
7
59

Advertisement

Table of Contents

   Also See for Brother MFC-440CN

   Related Manuals for Brother MFC-440CN

This manual is also suitable for:

Mfc-665cwMfc-845cw

Comments to this Manuals

Symbols: 0
Latest comments: