Brother MFC-440CN User Manual page 153

Error Message
Low Temperature
Media Error
Near Empty
No Caller ID
No Cartridge
No File
No Paper Fed
No Response/Busy
Not Registered
Cause
The print head is too cold.
The media card is either
corrupted, improperly formatted,
or there is a problem with the
media card.
One or more of the ink cartridges
are running out of ink. If a sending
machine has a color fax, the
' '
machine's handshake will ask
that the fax be sent as black and
white. If the sending machine has
the ability to convert it, the color
fax will be received into memory
as a black and white fax.
There is no incoming call history.
You did not receive calls or you
have not subscribed to the Caller
ID service from your telephone
company.
An ink cartridge is not installed
properly.
The media card in the media drive
does not contain a .JPG file.
The machine is out of paper or
paper is not properly loaded in the
paper tray.
The paper is jammed in the
machine.
The number you dialed does not
answer or is busy.
You tried to access a Speed Dial
number that is not programmed.
Troubleshooting and Routine Maintenance
Action
Allow the machine to warm up.
Put the card firmly into the slot again to
make sure it is in the correct position. If the
error remains, check the media drive by
putting in another media card that you
know is working.
Order a new ink cartridge. (See Ordering
accessories and supplies on page iii.)
If you want to use the Caller ID feature call
your telephone company. (See Caller ID
on page 56.)
Reinstall the ink cartridge. (See Replacing
the ink cartridges on page 143.)
Put the correct media card into the slot
again.
Do one of the following:
Refill the paper in the paper tray, and
then press Black Start or Color Start.
Remove the paper and load it again
and then press Black Start or
Color Start.
See Printer jam or paper jam on page 141.
Verify the number and try again.
Set up the Speed Dial number. (See
Storing Speed-Dial numbers on page 66.)
137