Download  Print this page

Using A Non-brother Cordless External Telephone (mfc-440cn And Mfc-665cw Only); Using Remote Codes - Brother MFC-440CN User Manual

Brother mfc-440cn: users guide.
Hide thumbs


Chapter 7
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code # 5 1 to take the
call at an extension phone. (See F/T Ring
Time (Fax/Tel mode only) on page 49.)
If you answer a call and no one is on
the line:
You should assume that you're receiving a
manual fax.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 50.)
Using a Non-Brother cordless
external telephone
(MFC-440CN and MFC-665CW
If your non-Brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook or Speaker Phone to send the call to
the cordless handset.

Using remote codes

Fax receive code
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialing the fax receive code
l 5 1. Wait for the chirping sounds then
replace the handset. See Easy Receive on
page 50. Your caller will have to press Start
to send the fax.
Telephone answer code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension phone you
can turn the F/T ring off by pressing # 5 1
(make sure you press this between the rings).
Changing the remote codes
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
Press Menu.
Press a or b to choose Fax.
Press OK.
Press a or b to choose
Setup Receive.
Press OK.
Press a or b to choose
Remote Codes.
Press OK.
Press a or b to choose On (or Off).
Press OK.
Enter the new Fax Receive Code.
Press OK.
Enter the new Telephone Answer Code.
Press OK.
Press Stop/Exit.
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another three-
digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.


Table of Contents

   Also See for Brother MFC-440CN

   Related Manuals for Brother MFC-440CN

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: