Very Important; Registering The Distinctive Ring Pattern; Caller Id - Brother MFC-3200C User Manual

Brother mfc-3200c: users guide
Hide thumbs Also See for MFC-3200C:
Table of Contents

Advertisement

VERY IMPORTANT

If you have Voice Mail or a TAD (Telephone Answering Device) and want to
keep one of your phone numbers dedicated only to fax calls, you must leave the
MFC in
MANUAL
Here's why:
MANUAL
«Neutral». When the MFC is in this «neutral» mode, the Distinctive Ring Feature
can be activated. The Distinctive Ring feature is actually an answering mode. So,
do not activate
Ring; otherwise, MFC will answer calls for all the numbers.

Registering the Distinctive Ring Pattern

1
Set the MFC to
2
Press Menu/Set, 2, 0, 1.
3
to select DISTINCTIVE:SET?, and then press Menu/Set.
Press
or
4
Press
to select the prestored ring pattern you want to assign, and then press
or
Menu/Set. (You will hear each pattern as you scroll through the four patterns.)
Be sure to choose the pattern assigned by the telephone company.
5
Press Stop/Exit.

Caller ID

The Caller ID feature lets you use the Caller ID subscriber service offered by
many local telephone companies. This service provides you, by means of the
LCD, the name or telephone number of your caller as the line rings.
After a few rings, the LCD shows the telephone number of your caller (or name,
if available). Once you pick up the handset, the Caller ID information disappears
from the LCD, but the call information remains stored in the Caller ID memory.
You will see the first 16 characters of the number (or name).
OUT OF AREA
area.
PRIVATE CALL
transmission of information.
CALL PICKUP
was transmitted.
If both the name and number are received, the LCD shows only the name. You
can print a list of Caller ID information received by your MFC. (See
, page 9-4.)
Caller ID List
mode at all times while using the Distinctive Ring Feature.
mode will never pick up a call by itself, since it is
FAX ONLY
mode or
MANUAL
mode.
display means call originates outside your Caller ID service
display means the caller has intentionally blocked
display remains on the LCD when no Caller ID information
FAX/TEL
mode while using Distinctive
T E L E P H O N E S E R V I C E S
Printing
9 - 3

Advertisement

Table of Contents
loading

Table of Contents