Table of Contents
Advertisement
DIFFICULTY
Software Difficulties
Cannot perform '2 in 1' printing.
Cannot print when using Paint Brush.
Cannot print when using Adobe
Illustrator.
Thick line and thin line appear
alternately. (banding)
There are some dense lines.
When using ATM fonts, some
characters are missing or some
characters are printed in the same
place.
Printing is slow.
True2Life is not working correctly.
"MFC is Busy" or "MFC Connect
Failure" Error Message appears.
"MFC Connect Failure"
23 - 9
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
SUGGESTIONS
Check that the paper size setting in the application and in the printer driver
are the same.
Try setting the Display setting to '256 colors.'
Try to reduce the printing resolution.
Turn OFF 'Bi-Directional Printing' from the 'Quality/Color' tab in the
printer driver.
Turn ON 'Reverse Order' from the 'Paper' tab in the printer driver.
®
If you are using Windows
menu. Open 'Brother XXXX' properties. Click 'Spool Setting' on the
'Details' tab. Select 'RAW' from 'Spool Data Format'.
In the Quality/Color tab of the Print dialog box, select Auto in the
Document section.
If the image data is not full color (such as 256 color) in your application,
True2Life does not function. Please use at least 24 bit color data with the
True2Life feature.
Make sure the MFC is not displaying an error message on the LCD.
If the MFC is not connected to your PC and you have loaded the Brother
software, the PC will show "MFC Connect Failure" each time you restart
®
Windows
. You can ignore this message or you can turn it off by deselect
the AutoLoad PopUp check box in the Brother Control Center chapter.
(See How to Turn Off AutoLoad, page 15-2.)
98, select 'Printer Settings' from the 'Start'
Advertisement
Table of Contents
