Page 2
The functional principle of AirPort24 radio-controlled slave clocks AirPort24 is a master and slave clock system that transmits time and date information wire- lessly via radio (869.525 MHz). Range in buildings up to 250 m in a radius around the Air- port24 transmitter, up to 1,000 m in clear view, extendable with Airport24 repeater.
Page 3
If the AirPort24 slave clock receives the time telegrams from the AirPort24 transmitter or the AirPort24 repeater, this is indicated by the first flashing of the green LED and is an indicator of sufficient radio reception. Each further blinking of the green LED indicates that the time is being passed on from the AirPort24 receiver board to the clockwork electronics and is there- fore no longer an indicator of sufficient radio reception.
Page 4
■ Maintenance and repair Maintenance and repair work may only be carried out by qualified and competent personnel or by a specialist workshop or by Mobatime. Cleaning For cleaning, please use a dry, clean, soft cloth. Do not use any chemical cleaning agents.
Need help?
Do you have a question about the AirPort24 and is the answer not in the manual?
Questions and answers