Mobatime Flex Installation Manual

Installation Manual
Flex Indoor Clock, single- or double-sided, without illumination
Before installation of the clock please read the manual carefully.

1. Notes to this Installation manual


The information in this installation manual can be changed at any time without previous notice.

This installation manual has been composed with utmost care, in order to explain all details in respect of
the operation of the product. Should you, nevertheless, have questions or discover errors in this Manual,
please contact us.

We do not answer for direct or indirect damages, which could occur through incorrect use of this manual.

Please read the instructions carefully before setting-up of the product. Use the product only once you
have correctly understood all information for the installation and of the operation.

The installation must only be carried out by a skilled person.

It is prohibited to reproduce, to store in a computer system or to transfer this publication in a way or
another, even part of it. The copyright remains with all the rights with MOSER-BAER AG – CH 3454
Sumiswald / Switzerland and BÜRK MOBATIME GmbH, D-78026 VS-Schwenningen / Germany.
.

2. Handling instructions


The clock must be transported upright in its original packaging and has to be stored dry.

Clean the cover glass with wet (leather-) cloth.

Never use solvents, aerosol or organic cleaning products.

The housing can be cleaned with standard cleaning agents.

3. Electrical connections

The mains supply line may only be installed by a licenced electrician.
The nationally valid installation regulations must be complied with.

The clock does contain a plug-in terminal, which serves as an all wires disconnecting device. In the on-
site supply line for movement, a fuse according to the consumption is to provide.
Maximum wire cross section of 2.5 mm² shall be used.

For all maintenance and cabling work, the clock has to be separated from the mains power supply.
© MOBATIME