Setting The Cooking Time; Enabling/Disabling The Temperature Melting Function; Switching The Appliance On And Off - Angelo Po 0S1FR1ED User Manual

USE AND OPERATION
Manual cooking
Proceed as follows.
Press key (D). The last value set appears on
1)
the display (A).
Press keys (F-G) to increase or decrease the
2)
value displayed. The cooking time increases
or decreases by 30 seconds each time one of
the keys (F-G) is pressed.
Press key (D) again to start the cooking cycle.
3)
If key (D) is pressed after the cooking cycle is
started, the display shows the cooking time
set for 4 seconds.

ENABLING/DISABLING THE TEMPERATURE MELTING FUNCTION

Proceed as follows.
Press key (E) to enable the temperature melt-
1)
ing stage. The indicator light (Q) comes on.
Press key (E) to disable the temperature melt-
2)
ing stage. The indicator light (Q) comes off .
NOTE: The temperature melting func-
tion is always enabled whenever a heating
operation is started with the actual tem-
perature in the well below 90°C.
Switching on the appliance
Connect the appliance to the mains power
1)
supply using the master switch-disconnec-
tor. The mains light (P) goes on.
Press key (B) to switch the appliance to
2)
"stand-by" mode. The mains light (P) goes off
and the screen shown appears on the display
(A).
Press key (B) to switch on the appliance and
3)
start the cooking cycle. The cooking tem-
perature set will appear (red) on the display
(A).
3395270_ut_GB

SETTING THE COOKING TIME

SWITCHING THE APPLIANCE ON AND OFF

A
F
B
P
ENGLISH
G D
Q E
A
19