Installing The Sa-Pcr Drivers In Odi Systems - Alvarion BreezeNET PRO.11 Series User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management

4.9 Installing the SA-PCR Drivers in ODI Systems

The ODI driver supports Novell VLM and NETX clients, Novell TCPIP, Lantastic
v.6 (with ODINSUP), Microsoft Windows 3.11 (with ODINSUP).
The following files are supplied for the DOS ODI environment:
brzwlan.com
brzwlanf.com
brzwlan.ini
brzsetup.exe
net.cfg
Brzwlan.ins
1. The ODI driver gets its resources from the Card & Socket Services. Verify that
the PC you are using is installed with Card & Socket Services software.
2. Copy all files from the DOSODI directory on the driver to the NetWare client
directory. (In case you already have a NET.CFG file that you want to keep,
copy and paste the BRZWLAN section from the sample NET.CFG file supplied
by BreezeCOM, into your existing file.
3. In order to login to a NetWare server you should run the following files (make
sure that the NET.CFG and the BRZWLAN.INI files are located in the
directory from which you run the following files:
4. After running the BRZWLAN file, the yellow LED on the card should blink
several times and then remain lit.
User's Guide
ODI driver file, generic version
ODI driver file for Falcon 310 (supplied only on request)
Default configuration file
Site survey utility
Sample ODI16 configuration file
Installation information for Novell client (DOS and Windows)
LSL.COM (supplied by Novell)
BRZWLAN.COM
IPXODI.COM (supplied by Novell)
VLM.EXE (supplied by Novell)
4-38
BreezeNET PRO.11 Series