Alvarion BreezeNET PRO.11 Series User Manual page 38

Using the Local Terminal for Unit Setup and Management
Menu
2.5. Rate
2.6. AP Redundancy
2.7. Maintenance
3. Site Survey 3.1. System Counters
3.2. Survey Software
3.3. Event Log
3.4. Display
4. Access Control 4.1. Change Access
4.2. Change Installer
4.S Show Current
* Option 1.3.5 Transmit Antenna has the default value Use #2 for the SA-40
unit only.
** Option 1.3.7 Load Sharing has the default value Enabled for the AP-10 unit
only.
User's Guide
Sub-Menu
2.5.1 Multi-Rate Support
Support
2.7.1 Auto Calibration
2.7.2 Wait for Association Address
2.7.3 Japan Call Sign
3.1.1 Display Ethernet and WLAN Counters
3.1.2 Display Rate Counters
3.1.3 Display Rx packets per frequency
3.1.4 Reset All Counters
3.1.5 Power Saving Counters
3.2.1 Operation mode(RX/TX)
3.2.2 Start Statistics
3.2.3 Stop Statistics
3.3.1 Display Event Log
3.3.2 Erase Event Log
3.3.3 Event storage policy
Neighboring APs
4.1.0 User
Rights
4.1.1 Installer
4.1.2 Technician
Password
Access Right
Sub-Menu
3-4
Default Values
Enabled
Disabled
Enabled
(not available in APs)
RX only
From level warning
up
Installer
"User"
BreezeNET PRO.11 Series