6. Click the Windows Start button and select Run. Type
The Windows NT Diagnostics window appears.
7. Click IRQ and verify that IRQ 11 is not taken. If it is, find a free IRQ.
For example, in Figure 4-4 IRQ 5 is free.
8. Click Memory and verify that memory from D0000h to D3FFFh is not taken.
If it is, find another free memory location, such as E0000h.
9. Return to the SA-PCR LAN Adapter Properties window. If the default values
for Memory Address and Interrupt are acceptable, click OK. Otherwise,
enter new values and click OK.
10. Click Close to close each installation window.
11. If configuration windows for other network components (such as Protocol)
appear, enter the requirements according to the instructions of your network
administrator.
12. Restart Windows NT.
BreezeNET PRO.11 Series
SA-PCR PRO.11 PC Card Installation, Setup, and Management
Figure 4-4. Windows NT Diagnostics Window
4-9
and click OK.
WINMSD
User's Guide