Sa-Pcr Site Survey Main Window - Alvarion BreezeNET PRO.11 Series User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management

4.6.2 SA-PCR Site Survey Main Window

The Site Survey main window contains the following sections:
Associated AP – This section, located at the top of the window, displays
various parameters regarding the Access Point with which the unit is currently
associated.
Alias – The alias you have assigned to the AP that the SA-PCR is currently
associated with. To assign aliases to AP units, click the Alias button. If no
alias has been assigned to the AP, this field displays "no alias".
AP Address – The IEEE MAC address of the AP.
Signal Strength – The strength of the signal from the AP in dBm. The table
below maps the signal strength indicators to dBm ranges:
dBm
Signal Bar – The signal bar is a graphical representation of the signal strength.
The longer the bar, the stronger the signal. As signal strength drops, the bar
changes from green, to yellow, to red
Neighbor APs – This section, located at the bottom of the window, displays
nearby APs (up to 4)from which the station is receiving a signal. For each AP,
the following parameters are displayed:
Alias – The alias you have assigned to the AP. To assign aliases to AP units,
click the Alias button. If no alias has been assigned to the AP, this field
displays "no alias".
AP Address – The IEEE MAC address of the AP.
Signal – A miniature signal bar indicating the current signal strength from the
AP. When you hold the cursor over the line, the exact value appears.
User's Guide
Signal Poor
less than -74
Fair
-74 to -69 -68 to -61
4-28
Good Very Good
greater than -61
BreezeNET PRO.11 Series